Step 1: 

Prepare a smooth, clean, dry surface.  Surface may be primed or painted.

(Remember your design will be the paint color that is under the tape or what is between two tape edges.)

Step 2:

Apply Agapo Tape on prepared surface in desired design.  Make sure the tape is pressed down firmly and edges are not raised.

(Tip: use an object, such as the back of a spoon, to press down on tape to assure a tight seal to prevent paint from seeping under the tape edge)

Step 3:

Apply a new coat of paint with brush, sponge, or spray can making sure to coat evenly over surface.  As you paint over the Agapo Tape, be careful not to lift taped edges during the application process.

Step 4:

Allow surface to dry. Carefully remove Agapo Tape to reveal your creative design!